Technical data

Using Technician Interface Software
C-34
303561-A Rev 00
Parameter: Messaging Enable
Attribute Name: wfSyslogHostDisable
Attribute Number: 2
Default: 1 (Enable)
Options: 1 (Enable)
|
2 (Disable)
Function: Enables or disables message forwarding from Syslog to the remote host
associated with this host entry.
Instructions: Set to 1 to enable message forwarding from Syslog to the remote host
associated with this host entry. Set to 2 to disable message forwarding
from Syslog to the remote host associated with this host entry.
You can also stop forwarding router events to the host by deleting the
host. (See the Host Delete parameter, wfSyslogHostDelete, on
page C-33
.) If you delete a remote host and later decide you want to
forward router events to that host, you must add the remote host again to
the Syslog host table.
Command:
set wfSyslogHostEntry.wfSyslogHostDisable. <host_IP_address>
<1
|
2>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.15.2.1.2