Technical data

Using Syslog Messaging to Monitor Router Events
303561-A Rev 00
C-33
Host Parameters
This section describes parameters you can configure for each host you add to the
Syslog host table (list of remote UNIX hosts).
Parameter: Host Delete
Attribute Name: wfSyslogHostDelete
Attribute Number: 1
Default: 1 (Create)
Options: 1 (Create)
|
2 (Delete)
Function: Adds or deletes a remote host entry in the Syslog host table. Parameters
associated with this entry collectively define a remote host that will
receive Syslog (event) messages from the router.
Instructions: Set to 1 to add a host to the Syslog host table. Set to 2 to delete a host
from the Syslog host table.
Command:
set wfSyslogHostEntry.wfSyslogHostDelete.
<host_IP_address>
<1
|
2>