Technical data

Using Syslog Messaging to Monitor Router Events
303561-A Rev 00
C-31
Parameter: Syslog Operational State
Attribute Name: wfSyslogOperState
Attribute Number: 3
Default: 1 (active)
Options: 1 (active)
|
(2) inactive
Function: Indicates the operational state of the Syslog service on the router. If the
state is active, syslog has been enabled, and is filtering and forwarding
messages to designated hosts. If the state is inactive, Syslog is not filtering
or forwarding messages for any of the following reasons:
• Syslog has been disabled (wfSyslogDisable = 2).
• No entries exist in the Syslog host table.
• No entries in the Syslog host table have been enabled.
• No entries enabled in the Syslog host table have filters that have been
enabled.
Instructions: Examine the value of this attribute to determine the operational state of
Syslog services on the router.
Command:
get wfSyslog.wfSyslogOperState
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.15.1.3