Technical data

Using Technician Interface Software
C-30
303561-A Rev 00
Global/Group Parameters
This section describes the Syslog group/global parameters.
Parameter: Syslog Delete
Attribute Name: wfSyslogDelete
Attribute Number: 1
Default: 1 (Create)
Options: 1 (Create)
|
2 (Delete)
Function: Creates or deletes the Syslog service on the router.
Instructions: Set to 1 (Create) to create a MIB record with system defaults for the
Syslog service on the router. Set to 2 (Delete) to delete the Syslog service
from the router configuration.
Command:
set wfSyslog.wfSyslogDelete.0
<1
|
2>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.15.1.1
Parameter: Enable
Attribute Name: wfSyslogDisable
Attribute Number: 2
Default: (1) Enable
Options: (1) Enable
|
(2) Disable
Function: Enables or disables Syslog services on the router.
Instructions: Enable Syslog services by also defining at least one remote host entry in
the Syslog table of hosts, and at least one entity filter for the remote host
you define.
Set to 2 (Disable) if you want to disable Syslog services on the router.
Command:
set wfSyslog.wfSyslogDisable.0
<1
|
2>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.15.1.2