Technical data

Using Technician Interface Software
C-18
303561-A Rev 00
2.
To define the UNIX system facility you want to receive Syslog messages
from the router, enter the following:
$: set wfSyslogHostTable.wfSyslogHostLogFacility. <host_IP_address>
<128
|
136
|
144
|
152
|
160
|
168
|
176
|
184> ;commit
where:
3.
To optionally enable Syslog message time sequencing for the remote host,
enter the following:
$: set wfSyslogHostTable.wfSyslogHostTImeSeqEnable.
<host_IP_address>
1;commit
Next, add an entity filter for the host entry you just added.
128 = local0 160 = local4
136 = local1 168 = local5
144 = local2 176 = local6
152 = local3 184 = local7
Note:
Only hosts represented by entries that are ENABLED
(wfSyslogHostDisable =1) and have an operational state of ACTIVE
(wfSyslogHostOperState = 1) receive messages from Syslog on the router.