Technical data

Using Out-of-Band Access to Transfer Files
303561-A Rev 00
B-27
5.
To set the receiving
Wfterm
utility into receive mode, choose
YMODEM-Receive from the File Transfers menu.
Choosing this option opens the File to Transfer window, as shown in
Figure B-10
.
Figure B-10. Wfterm File to Transfer Window
6.
Select the drive and directory that should receive the file from the router.
If you want to rename the file upon receipt at the workstation, you can also
type a file name into the File Name field.
7.
Click on OK.
Clicking on OK notifies the sending Technician Interface to terminate its
wait-before-transmit state, and to send the file you specified in the File to
Transfer window.
The file transfer was successful when you see the
File Transfer Completed
message
in the Wfterm startup window.
Note:
To ensure that files are transferred properly, do not issue the
xmodem
command with the <wait> parameter when you perform out-of-band file
transfers to or from a Windows workstation that has Wfterm running on it.