Technical data

Using Technician Interface Software
B-26
303561-A Rev 00
Proceed as follows to transfer one or more files from a router to your workstation:
1.
Enter a
cd
command to designate the disk volume or memory card
“volume” that contains the files you want to transfer to your UNIX
workstation.
For example:
cd a: (designates diskette volume a)
or
cd 2: (designates a memory card volume in router slot 2)
2.
Enter a
dir
command to view the list of files in the volume/memory card.
The system displays a screen similar to the following table:
3.
Determine which files you need to transfer from the router to the
workstation.
4.
Enter the
xmodem
send binary command, as follows:
xmodem sby <source_vol> : <filename>
sb is a send binary file.
y is the YMODEM file transfer option.
<source_vol> is either a slot number of a memory card or the letter of the disk
drive volume that contains the files you want to send to the workstation.
<filename> is the name of the file you want to send from the router to the
workstation. If you want to enter multiple file names as part of a YMODEM
batch file transfer operation, insert a space character between the file names.
(For more information about Technician Interface file name specifications, see
Chapters 4 and 5.)
File Name Size Date Day Time
abc.cfg 1814 10/28/94 Thurs. 10:29:06
def.cfg 2293 11/03/94 Wed. 17:16:29
ghi.cfg 4197 11/15/94 Mon. 08:34:04