Technical data

Using Out-of-Band Access to Transfer Files
303561-A Rev 00
B-25
Figure B-9. Wfterm File Transfer Operation Selection Window
Transferring Files from a Router to a DOS Workstation
To transfer one or more files from a router to your Site Manager workstation, you
must
1. Be logged in to the Technician Interface of the appropriate router. (See
“Logging In to the Router’s Technician Interface
” on page B-24.)
2. Select the disk volume or memory card “volume” that contains the files you
want to transfer to your workstation.
3. Set the receiving Wfterm utility into receive mode.
4. Trigger or initiate the file transfer from the router to your workstation.
Note:
Because the Wfterm utility provides more functionality than is required
to support YMODEM file transfers, the File Transfers menu contains options
for up to fourteen different file transfer operations. However, to transfer files
between a workstation and a Bay Networks router, you need only the
ymodem-send and ymodem-receive options. This section provides only the
information you need for the YMODEM options.