Technical data

Using Out-of-Band Access to Transfer Files
303561-A Rev 00
B-23
Figure B-8. Wfterm Dial Command Window
Enter in the Dial Command window the telephone number of a router that has a
configuration file you want to retrieve. Clicking on OK initiates the dialing
sequence.
If the call in progress is successful, Wfterm opens a connection between your Site
Manager workstation and the Technician Interface port of the called router. The
Technician Interface login prompt appears in the Wfterm startup window, but you
may have to press return to invoke the Technician Interface prompt.
If the call in progress is unsuccessful, Wfterm displays an appropriate message in
the startup window.
Note:
You can enter and store one telephone number in the Dial Command
window. Each time you need to call a different router, enter the telephone
number of that router in the Dial Command window. It may be helpful for you
to maintain a list of the telephone numbers for every router you need to access
by means of out-of-band, dial-in connection.
The
Wfterm
utility always retains the last number you enter. Closing and
reopening
Wfterm
does not clear the number last stored.