Technical data

Using Technician Interface Software
B-14
303561-A Rev 00
5.
Press Return to invoke the Technician Interface login prompt from the
target router.
The system displays the following prompt:
Login:
6.
Enter
Manager
and a password, if necessary, to log in to the router’s
Technician Interface.
The system displays the following message and prompt:
Welcome to the <Node_Type> Technician Interface.
$
7.
Enter a
cd
command to designate the disk volume or memory card
“volume” that should receive the files you want to transfer from your
UNIX workstation.
For example:
cd a: (designates diskette volume a)
or
cd 2: (designates a memory card volume in router slot 2)
8.
Enter the
xmodem
receive binary command, as follows:
xmodem rby
rb
is a receive binary file.
y is the YMODEM file transfer option.
9.
Type ~
c
(tilde-c) to escape momentarily from the Technician Interface
command line prompt to the UNIX workstation command line prompt.
The workstation responds:
Local command?