Technical data

Managing Aliases
303561-A Rev 00
9-17
ospf_intf
Reports the state of all the router’s OSPF interfaces,
including virtual links. The states are
1 = Down
2 = Loopback
3 = Waiting
4 = Point to point
5 = Designated router
6 = Backup designated router
7 = Other designated router
ospf_lsdb
Lists all interfaces in the link-state database.
ospf_nbrs
Reports the state of every OSPF neighbor that the
router knows about. The states are
1 = Down
2 = Attempt
3 = Init
4 = Two way
5 = Exchange start
6 = Exchange
7 = Loading
8 = Full
protocols
Displays bit map in decimal form representing all
protocols running and their associated slots.
setvol
<slot_no.>
Sets the active volume for TFTP (puts and gets).
shovol
Displays the current active volume for TFTP (puts and
gets).
snmpbase
Displays all SNMP configuration parameters (base
record).
sr_intf
<instance_ID>
Enables or disables source routing for a specific
interface.
1 = Enable
2 = Disable
sr_info
Displays the contents of the source routing database
record.
sr_cctstats
<circuit_no.>
Displays the status of the specified circuit.
stid
Displays the spanning tree node identifier.
(continued)
Table 9-1. Aliases for Debugging Network Problems
(continued)
If you enter: The system: