Technical data

Using Technician Interface Software
9-16
303561-A Rev 00
lbstate
Displays bridge interfaces and their current states. The
following example shows one line in the list of
interfaces, where 1 is the index and 2 is the state:
wfBrTpInterfaceEntry.wfBrTpInterfaceState.1 =
2
The states are
1 = Up
2 = Down
3 = Init
4 = Not present
lbstats
Displays bridge receive, transmit, and dropped packet
statistics.
mem_info
<slot_no.>
Displays the specified slot’s total physical memory and
the memory allocation for the local and global memory
pools, in KB. For example, if you enter mem_info 2, the
system displays information similar to the following
:
Memory information for slot 2:
wfKernParamEntry.wfKernParamTotMem.2=8192
wfKernParamEntry.wfKernParamLocMem.2=6144
wfKernParamEntry.wfKernParamGlobMem.2=2048
osiadjs
Displays the adj ID.
osil1lsp
Displays the LSP ID for Level 1.
osil2lsp
Displays the LSP ID for Level 2.
osil1routes
Displays the path or router ID for Level 1.
osil2routes
Displays the path or router ID for Level 2.
ospf_drs
Reports the designated router and backup designated
router for each of the router’s attached OSPF networks.
(continued)
Table 9-1. Aliases for Debugging Network Problems
(continued)
If you enter: The system: