Technical data

Using Technician Interface Software
9-12
303561-A Rev 00
bgp3nexthop
Displays the
NEXT_HOP
attribute of each network
advertisement received via BGP-3.
bgp3metric
Displays the
INTER_AS_METRIC
attribute of each
network advertisement received via BGP-3.
cctnames
Displays all circuit names.
ccttypes
Displays all circuits and their types. The types are
10 = CSMACD
20 = SYNC
30 = T1
40 = E1
50 = Token
60 = FDDI
decadjs
Displays all DECnet adjacent nodes and their
respective adjacency table indexes. The following
example shows one line in the display, where 6145 is
the index, 2 is the area, and 3 is the node:
wfivAdjEntry.wfivAdjNodeAddr.6145 = "2.3"
decadj <index>
Displays DECnet adjacency information about the
index you enter. You can obtain the <
index
> by using
the
decadjs
alias.
decarts
Displays all known DECnet areas and the next hop to
each of these areas.
decarinf
<area>
Displays DECnet area information for the area you
enter.
decbase
Displays DECnet global configuration parameters
(base record).
decdr
Displays the designated router address for each
DECnet interface.
decnrts
Displays DECnet Level 1 routing node information.
decninf
<area.node>
Displays DECnet information about the node whose
area and node number you enter.
decifs
Displays node and area configuration, and interface
indexes for all interfaces running DECnet.
(continued)
decif <index>
Displays DECnet information for the interface index you
enter. You can obtain the <
index
> by using the
decifs
alias.
Table 9-1. Aliases for Debugging Network Problems
(continued)
If you enter: The system: