Technical data

Using Technician Interface Software
8-90
303561-A Rev 00
ip6 routes -pDN
Next Hop
Prefix Protocol Intf. Weight
------------------------------------------- ---------- ------- ----------
FE80::0040:0522/128 DynNode 1 0x7ffe0001
FE80::0006:A240:0522/128 DynNode 3 0x7ffe0001
FE80::5E10:AF47:0101/128 DynNode 5 0x7ffe0001
FE80::0200:A2FF:FE0B:AE7E/128 DynNode 2 0x7ffe0001
Total routes: 4
Example (ip6 routes -l -p<protocol> -i<ifindex>)
Enter the following command to display
data, in long format, for all RIPv6 routes
pointing out interface
2:
ip6 routes -l -pRIP -i2
Next Hop
Prefix Protocol Intf. Weight
------------------------------------------- ---------- ------- ----------
3FFE:1300:0002:0100::0000/64 RIPv6 2 0x739c0002
RIPv6 Metric: 2, Nexthop: FE80::0200:A2FF:FE0B:AE7E
Last updated 96387 seconds ago
3FFE:1300:0002:0101::0000/64 RIPv6 2 0x739c0002
RIPv6 Metric: 2, Nexthop: FE80::0200:A2FF:FE0B:AE7E
Last updated 96387 seconds ago
3FFE:1300:0002:0102::0000/64 RIPv6 2 0x739c0002
RIPv6 Metric: 2, Nexthop: FE80::0200:A2FF:FE0B:AE7E
Last updated 96387 seconds ago
.
.
.
Obtaining IPv6 Interface Statistics
The ip6 stats command displays version 6 statistics for all interfaces (by not
specifying an interface index) or a specific interface on the device.
Example (ip6 stats <ifindex>)
Enter the following command to display data for interface 1 on the device: