Technical data

Using Technician Interface Software
8-66
303561-A Rev 00
-s <slot_number>
Retrieves data for the slot you specify after the -s flag.
If you also specify an address of 255.255.255.255 for
a given slot, the command displays only the internal
cache for that slot. If you do not enter a slot number,
the command retrieves only data pertaining to the slot
where the Technician Interface is running.
routes
|
bgp_routes
|
cache
|
dvmrp_caches
|
mtm
-t
<type_number>
Retrieves data for the OSPF LS type (type of link state
advertisement) that you specify after the -t flag, as
follows:
0 = stub advertisement
1 = router links advertisement
2 = network links advertisement
3 = summary link (IP network) advertisement
4 = summary link (ASBR) advertisement
5 = external link advertisement
6 = group membership link advertisement
15 = opaque link advertisement
16 = resource link advertisement
For more information about LS Types, see RFC 1583.
ospf_lsdb
Table 8-7. Flag Descriptions
(continued)