Technical data

System Administration

303561-A Rev 00

8-63

Then save the configuration with these changes to the configuration file.

When you set the wfCSMACDAlignmentMode attribute to 1 (ALIGN_ALL), the

router realigns the nonoptimally aligned frames before transmitting them.

When you set the wfCSMACDAlignmentMode attribute to 3 (DISABLED), the

router transmits the nonoptimally aligned frames without realigning them first.

When you set the wfCSMACDAlignmentMode attribute to 2

(ALIGN_OVER_128_BYTES), the router realigns the nonoptimally aligned

frames exceeding 128 bytes before transmitting them, and transmits the

nonoptimally aligned frames of 128 bytes or less without realigning them first.

Monitoring IP Routes

The

command allows you to display IP data from any of the following sources:

• Main routing table for any slot

• Internal cache for any slot

• Routing cache for a specific logical interface

• Multicast routes cache

• BGP routes table for any BGP peer

• OSPF Link State Data Base (LSDB)

You choose the source by specifying a <subcommand> in the command line. You

can also selectively filter the data by specifying one or more option <flags> in the

command line.

Enter the

command as follows:

routes

bgp_routes

cache

dvmrp_caches

mtm

ospf_lsdb