Technical data

System Administration
303561-A Rev 00
8-49
Proceed as follows to assign a password:
1.
Enter the following:
password [ Manager
|
User]
The console displays one of the following messages:
Changing password for User
Changing password for Manager
2.
Proceed to step 3 if you are logged in as Manager and you are changing
the User password. Otherwise, enter the old password at the following
prompt:
Old password:
If there is no old password, press the Return key.
3.
Enter the new password after the following prompt:
New Password:
The password may have 0 to 16 alphanumeric characters. If you want to
remove password protection, press the Return key.
4.
Repeat step 3 after the following prompt:
Retype new password
The console displays one of the following messages:
User password changed
Manager password changed
If you enter the wrong password, the console displays the following message:
User password not changed
The Technician Interface prompt reappears.
If you do not reply to password prompts within about 30 seconds, the system
cancels the
password command and displays the following messages:
** Input timed out. **
Command aborted
The Technician Interface prompt reappears.