Technical data

System Administration
303561-A Rev 00
8-29
Examples:
The system runs diagnostics on the associated slot or slots, loads the router
software image, loads the configuration, and initiates the router software services.
When you issue the
diags or diags <slot_no.> command from a local console
rather than from a Telnet session, the results depend on
• The slot number you designate in the command line
• The model of Bay Networks router
• The type of router (single-slot or multislot)
Based on these variables, the router system or slot performs a restart, a
warm-boot, or a cold-boot operation. Tabl e 8- 5
describes the various responses the
router can have to different
diags commands.
diags
Runs diagnostics and reboots the entire system
diags 1
Runs diagnostics for and reboots slot 1
diags 1-5
Runs diagnostics for and reboots slots 1, 2, 3, 4, and 5
diags 4,6
Runs diagnostics for and reboots slots 4 and 6