Technical data

System Administration
303561-A Rev 00
8-25
5. The resetting processor module loads the configuration image and initiates the
services provided by the slot; connectivity is thus reestablished. The resetting
processor module alerts the other processor modules that it can receive
packets.
6. The other processor modules resynchronize their routing tables accordingly.
To reboot the entire system, enter only
reset at the command line prompt.
To reset only the processor module or modules you specify by <slot_no.>, enter
the
reset command as follows:
Examples:
When you issue the
reset or reset slot command from a local console rather than
from a Telnet session, the results depend on:
• The slot number you designate in the command line
• The slot number from which you issue the command
• The model of Bay Networks router
• The type of router (single-slot or multislot)
Based on these variables, the router system or slot performs a restart, a
warm-boot, or cold-boot operation. Table 8-4
describes the various responses the
router can have to different
reset commands.
reset
[
<slot_no.>
]
Reset one slot
reset
[
<slot_no.>-<slot_no.>
]
Reset a range of slots
reset
[
<slot_no.> , <slot_no.> ,
. . .
,
]
Reset a list of slots
reset
Resets the entire system
reset 1
Resets slot 1
reset 1-5
Resets slots 1, 2, 3, 4, and 5
reset 4, 6
Resets slots 4 and 6