Technical data

System Administration

303561-A Rev 00

8-21

Modifying Attributes for Scheduled Boot Events

You can modify

• The name of the router software image file

• The name of the router configuration file

You cannot directly modify the date, time, or UTC offset (attribute

wfRuiBootDateAndTime) for a scheduled boot event. If you need to change any

of these for an existing entry in the RUIBOOT table of scheduled boot events,

proceed as follows:

1. Delete the entry from the RUIBOOT table of scheduled boot events.

2. Create a replacement entry.

Deleting Scheduled Boot Events

Delete a scheduled boot event as follows:

BN [3]: set

wfRuiBootEntry.wfRuiBootDelete.

2;commit

You can save your change(s) to the current configuration file, as follows:

BN [3]: save config

<vol>

<vol>

is the NVFS flash volume on which you want to store a copy of the current

(modified) configuration file on the router.

is the name you assign to the current router configuration file.

Deleting Scheduled Boot Services from the Router

To delete scheduled boot services from the router, change the setting for

wfRuiBootDelete, a global parameter/attribute, as follows:

BN [3]:

set wfRuiBoot.wfRuiBootBaseDelete.0 2;commit