Technical data

System Administration

303561-A Rev 00

8-17

The following table specifies acceptable values for each octet of

Example:

Schedule a boot event for May 26, 1996, at 1:30:15 p.m., where the actual time

and date at the location of the target router is offset from UTC (GMT) by

-9 hours and 22 minutes.

If you have already enabled scheduled boot services on the router, enter the

following command line at the Technician Interface prompt:

set wfRuiBootEntry.wfRuiBootDateAndTime

19.96.05.26.13.30.15.00.45.09.22

Figure 8-2 shows how the values date, time, and UTC offset for this example map

into the value of the 11-octet attribute, wfRuiBootDateAndTime.

Field Values (decimal notation) Octet No.

Year 1996 to 9999 1 and 2

Month 1 to 12 3

Day 1 to 31 4

Hour 0 to 23 5

Minute 0 to 59 6

Second 0 to 60*

* Use 60 for leap-second.

Deci-seconds 0 to 9 8

Direction offset from UTC ASCII 43 (for “+”)

ASCII 45 (for “-”)

Hours offset from UTC 0 to 11 10

Minutes offset from UTC 0 to 59 11