Technical data

Managing Events
303561-A Rev 00
6-11
Parameter: Autosave Volume
Attribute Name: wfSerialPortAutoSaveVolume
Attribute Name: 34
Default: None
Options: Any valid memory card volume (slot) number from 1 to 14 or the diskette
drive designation,
-a
Function: Specifies the target volume where the system stores new log files saved
through the log autosave feature.
Instructions: Specify the memory card or diskette file system volume where the system
will save log files automatically through the log autosave feature.
Command:
set wfSerialPortEntry.34. <instance_no.> <option>
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.11.1.1.34
Log Autosave Platform Differences
This section describes platform-specific differences you need to consider before
attempting to configure the log autosave feature on any Bay Networks router.
Models AFN, ALN, AN, ANH, BLN, BLN-2, BCN, and BayStream --
Each model
supports only one instance of the wfSerialPortEntry object. For that instance, you
can configure the log autosave attributes wfSerialPortAutoSaveNumFiles and
wfSerialPortAutoSaveVolume.
Models CN, FN, and LN --
Each model supports four instances of the
wfSerialPortEntry object. Each instance corresponds to one of the following ports:
• wfSerialPortEntry.wfSerialPortName.1 = "CONSOLE"
• wfSerialPortEntry.wfSerialPortName.2 = "MODEM1"
• wfSerialPortEntry.wfSerialPortName.3 = "MODEM2"
• wfSerialPortEntry.wfSerialPortName.4 = "PRINTER"
Configure the log autosave attributes for the “CONSOLE” port instance only.
Model ASN --
Supports four instances of the wfSerialPortEntry object. Each
instance corresponds to one of the four slots possible in an ASN stack. Enable the
log autosave feature only on one occupied slot in the ASN stack.