Technical data

Managing a Nonvolatile File System
303561-A Rev 00
4-9
The factory-default file names are as follows:
ace.out
The router software image for the FN, LN, CN, and ALN.
You cannot read or change this file. The system automatically
refers to this binary file for booting instructions unless you use
the
boot command to specify a different router software image.
an.exe
afn.exe
arn.exe
asn.exe
bn.exe
s5000.exe
The router software image for the AFN.
The router software image for the AN and ANH.
The router software image for the ARN.
The router software image for the ASN.
The router software image for the BLN, BLN-2, and BCN.
The router software image for all System 5000 routers.
You cannot read or change this file. The system automatically
refers to this binary file for booting instructions unless you use
the
boot command to specify a different router software image.
afnboot.exe
A copy of the combined bootstrap PROM and diagnostics
PROM image for an AFN router.
anboot.exe
A copy of the bootstrap image resident on the bootstrap PROM
of an AN series router. You cannot read or change this file.
arnboot.exe
A copy of the bootstrap image resident on the bootstrap PROM
of an ARN router. You cannot read or change this file.
asnboot.exe
A copy of the bootstrap image resident on the bootstrap PROM
of an ASN router. You cannot read or change this file.
andiag.exe
A copy of the diagnostics image resident on the diagnostics
PROM of an AN series router. You cannot read or change this
file.
arndiag.exe
A copy of the diagnostics image resident on the diagnostics
PROM of an ARN series router. You cannot read or change this
file.
asndiag.exe
A copy of the diagnostics image resident on an ASN router. You
cannot read or change this file.
s5000boot.exe
A copy of the bootstrap image resident on the bootstrap PROM
of a System 5000 router. You cannot read or change this file.
s5000diag.exe
A copy of the diagnostics image resident on a System 5000
router. You cannot read or change this file.