Technical data

Using Technician Interface Software
4-6
303561-A Rev 00
Displaying the Status of All Memory Cards
Enter
dinfo
to display the status of all memory cards currently installed in the
router. Figure 4-1
shows a sample
dinfo
display of a system with memory cards
installed in slots 2 and 5.
Figure 4-1. Sample Dinfo Display
The
dinfo
command displays the following data:
Vo l: Slot number where the memory card is currently installed. (Vol is short for
volume.)
State: Either formatted or corrupted. If you purchase a card from another
supplier, the
dinfo
display may list it as corrupted. If a card is corrupted, format it.
(See “Formatting a Memory Card
” on page 4-20 for instructions.)
Total Size: Total number of bytes (used and unused) in the memory card.
Free Space: Number of unused bytes in the memory card.
Contig Free Space: Number of unused bytes in the largest block of available
space in the memory card.
$ dinfo
VOL STATE TOTAL SIZE FREE SPACE CONTIG FREE SPACE
---------------------------------------------------------------
2: FORMATTED 2097152 228663 220209
5: FORMATTED 4194304 1356883 1356883
$
TS0010A