User manual

Installing the BayStack Advanced Remote Node
114200 Rev. A 1-25
Refer to the modem user guide for instructions.
2. Power off the modem.
3. Insert the 9-pin receptacle end of the modem cable into the front-panel
console port (F
igure 1-17).
Figure 1-17. Connecting a Modem to an ARN
4.
Insert the 25-pin plug at the other end of the modem cable into the
modem RS-232 data communications port
.
Synchronous/Asynchronous Mode Asynchronous
AutoAnswer Answer on 2 rings with DTR active.
Local Character Echo Off
Supervisory Functions Off
Baud Rate 9600
Data Bits 8
Stop Bits 1
Parity None
Table 1-4. External Modem Parameters (continued)
Modem Signal/Parameter Value
PHONE
DWR
(LEASE
3810
(LEASED)
3810
NMS DTE
DIAL
Modem cable
ARN0057A
Redundant Power
Console
U
L
U
L
100-240~
1.2A
50-60Hz