User manual

Installing the BayStack Advanced Remote Node

114200 Rev. A 1-21

Connecting a Terminal Console

You need both pieces in the ARN console/modem cable kit (Order No. 110310) to

connect a terminal console:

• Order No. 110307 serial console/modem cable (with 9-pin receptacle to

25-pin plug connectors)

• Order No. 110308 null modem crossover adapter (with two 25-pin receptacle

connectors)

Once you have the appropriate equipment, complete the following steps:

1. Power on and conﬁgure the console, using the parameters in Table 1-3.

Refer to the console user manual for instructions.

2. Power off the console.

3. Attach the null modem crossover adapter to the 25-pin cable connector.

4. Insert the screw on the cable connector into the receptacle on the adapter

connector and tighten the screw (F

igure 1-14).

Figure 1-14. Attaching the Null Modem Adapter

Table 1-3. Console Parameters

Parameter Value

Baud Rate 9600

Data Bits 8

Stop Bits 1

Parity None

Null modem adapter

Console cable

Screw receptacle

Rotate to tighten screw

AN0010A