Technical data

Installing and Operating BayStack ARN/DC Routers
1-18
116273-B Rev 00
Connecting to an E1/FE1 Interface
You can connect E1/FE1 service to any ARN that contains an E1/FE1 adapter
module.
To connect to the E1/FE1 interface:
1.
Insert the RJ-48C cable connector into the E1/FE1 interface
(Figure 1-13
).
Figure 1-13. Connecting the E1/FE1 Cable
2.
Connect the other end of the cable to an E1 communications device.
ARN0090B
1
2
Local Alarm
E1/FE1
G.703
Remote Alarm
Loop
Sync