Technical data

Using Local Boot (the Quick-Start Procedure)
116273-B Rev 00
B-5
Global Information Worksheet
This section contains the prompts and possible options relating to all ARN/DC
serial configurations. Write your selection in the “Your Response” column.
Global Information Worksheet
Step Requested Information Options Your Response
1 Enter the module number [1]: The script lists the available
modules that you can use to
connect the router’s IP network
interface to Site Manager.
For example, the script might
offer the following options:
1. Token Ring on Base Module
2. Serial on Adapter Module 1
3. Ethernet Tri-Serial on
Expansion Module
Enter the number
that corresponds
to the module you
want to use.
2 Driver Type: If there is only one interface on
the module you chose, the script
automatically selects the driver
type for that interface and
bypasses this prompt. Otherwise,
the script displays a menu of
driver types. The actual menu
depends on the modules you
have installed.
Choose the
Synchronous
driver.
(continued)