Troubleshooting guide

Appendix A: State Tables for VPN-1/FireWall-1 4.0 Static tables (lists)
Advanced Technical Reference Guide 4.1 • June 2000 173
CVPserverIPaddress
firewalled_list table
The firewalled_list table holds a static list of FireWalled IP addresses.
Example
c0a86e01
c7cb471e
The firewalled_list table uses the following format:
FireWalled IP address
Object Lists tables
Object Lists tables are tables that correspond to groups that appear in rules.
FireWall-1 binds a list of related hosts, targets, gateways and nets, and gives them a number that corresponds to
the rule where they are being used. The host, gateway and net numbers correspond to the rule number in the
Rule Base. The target to which those rules apply to has a target_listX number greater by one than all the object
lists in that rule.
For example, suppose the rule objects have the following numbers: gateways_list1, host_list2 and host_list3. If
there are three rules, then the target_listX will be target_list4.
Below is an excerpt of the .pf file – the INSPECT script generated from the policy:
-------- gateway_list1 --------
c0a86e01
c7cb471e
-------- host_list2 --------
01010101
02020202
03030303
-------- host_list3 --------
04040404
05050505
06060606
-------- target_list4 --------
anka
-------- net_list1 --------
199.203.71.0
199.203.156.0
radius_servers_list table
The radius_servers_list table contains a list of RADIUS server IP addresses.
Example
c7cb47db
The radius_servers_list table uses the following format:
RADIUS server IP address