Troubleshooting guide

Appendix A: State Tables for VPN-1/FireWall-1 4.0 IIOP tables
Advanced Technical Reference Guide 4.1 • June 2000 172
dcom_remote_activations table
Th dcom_remote_activations table holds data on DCOM remote activation requests.
Example
attributes: sync refresh expires 60
The dcom_remote_activations table uses the following format:
<source IP address, source port, 4 GUID fields; 4 ClassID fields; time left/total time>.
Exchange_notifiers table
Information about this table will be available in the next update to this document.
IIOP tables
iiop_port_tab table
The iiop_port_tab table includes the ports used by the IIOP service (1570, 1571, 2649, 2651).
Example
<00000622>
<00000623>
<00000a59>
<00000a5b>
The iiop_port_tab table uses the following format:
<IIOP service port number>
iiop_requests table
Information about this table will be available in the next update to this document.
iiop_servers table
Information about this table will be available in the next update to this document.
Static tables (lists)
Static tables are tables with no values. Their entries are inserted during the security policy’s compilation and
cannot be changed during runtime. They do not time out, and are printed without the angle brackets.
cvp_servers_list table
The cvp_servers_list table contains a list of CVP server IP addresses.
Example
c7cb473e
The cvp_servers_list table uses the following format: