Technical data

BayRS and Site Manager Software Installation
10
305303-B Rev 00
f.
Click on OK.
After you choose the directory and file name of the image, the Image Builder
window lists the current components of that image.
2.
Modify the router software image.
You modify the software image to:
• Remove any nonessential files (protocols) that you will not use to save
space on the flash card. (Select the component in the Current Components
list and click on Remove.)
• Add new components (protocols) as you need them. (Select the
component in the Available Components list and click on Add.)
For detailed instructions on modifying a router software image, see
Configuring and Managing Routers with Site Manager.
3.
Save the router software image by choosing File
>
Save.
Bay Networks
®
recommends that you save modified software images in a
different directory, and that you use different image names for each router on
your network.
4.
Exit the Image Builder by choosing File
>
Exit.
5.
Prepare the router to receive the new software image.
Before you can transfer a customized image to the router that you want to
upgrade, you must first prepare the router’s flash card or flash SIMM to
receive a customized image and a configuration file. For instructions, see the
upgrading guide for your version of BayRS.
6.
Transfer the customized image and router files to the router.
You can use the Router Files Manager to transfer a customized software
image and associated router files to the router that you are upgrading using the
Trivial File Transfer Protocol (TFTP) command. For instructions, see the
upgrading guide for your version of BayRS.