Technical data

BayRS and Site Manager Software Installation
305303-B Rev 00
9
3.
Change directories by entering:
cd /cdrom
4.
Run the script to load the router software using one of the following
commands:
• On a SPARCstation or IBM workstation, enter:
./copy.sh
• On an HP 9000 workstation, enter:
./COPY.SH\;1
During the load procedure, you must specify the following:
• The directory where you want to load the router software, for example,
/usr/wf/rtr_1300
• The router platform
The system then loads the software for the platform you selected.
Continuing the Installation
For complete information about the tasks outlined in this section, see the
upgrading guide for your version of BayRS.
1.
Load the router software image into the Image Builder.
a.
In the Site Manager main window, choose Tools > Image Builder.
The Image Builder window opens. For complete information about the
Image Builder, see Configuring and Managing Routers with Site
Manager.
b.
Choose File > Open.
A window listing directories and files opens.
c.
Go to the directory where the router software image files reside (for
example,
/usr/wf/rtr_1300
).
d.
Double-click on the directory that contains the router software image
that you want to load (for example,
/usr/wf/rtr_1300/bn
).
e.
Select the file name of the router software image that you want to load
(for example,
bn.exe
).