Technical data

BayRS and Site Manager Software Installation
305303-B Rev 00
7
9.
For new installations, create the
builder
directory by entering:
mkdir $HOME/.builder_dir
10.
Edit the shell environment (see
Quick-Starting Routers
).
For example, on a workstation using the C shell (csh), add the following lines
to .cshrc:
set path = ($path /usr/wf/bin)
setenv WF_SMPATH /usr/wf
setenv SMTERM X
setenv SM_CONFIGS
<config_file_directory>
setenv BUILDER_DIR $HOME/.builder_dir
11.
Log out and log in again as the user.
12.
Verify the Site Manager installation by entering:
wfchkinst
13.
Verify the Site Manager environment by entering:
wfchkenv
14.
Start Site Manager by entering:
wfsm -a <router_IP_address> &
router_IP_address is the IP address of the router’s initial interface.
15.
Repeat steps 8 through 14 for each user account that will need to access
Site Manager.
Installing BayRS
If you need to upgrade, modify, or reinstall router software, read the tasks in the
following sections:
• Installing BayRS on a PC
• Installing BayRS on a UNIX Workstation
• Continuing the Installation
Before you begin the installation, complete the preinstallation tasks for your
system (see the upgrading guide and, if applicable, the upgrade section of the
Document Change Notice for your version of BayRS). For complete information
about using the Image Builder and transferring router files to the router, see
Configuring and Managing Routers with Site Manager.