Technical data

Using the Centillion 100 ATMSpeed/155 Switch Modules and Media Dependent Adapters
2-16 893-01047-A
Figure 2-24. Connecting the serial MCP cable to the MCP modules
To use the Ethernet connection, attach an Ethernet cable to the RJ-45 port on the
ATMSpeed/155 MCP module (see Figure
2-25).
Figure 2-25. Connecting an Ethernet cable to the MCP modules
Note: The 10BASE-T Ethernet port on the ATMSpeed/155 MCP and
ATMSpeed/155 MDA MCP modules is not supported by the switch software
at this time. It will be supported in a future release.
MCP
6468
5634M