Technical data

Using the Centillion 100 ATMSpeed/155 Switch Modules and Media Dependent Adapters
2-12 893-01047-A
6. Insert the Phillips pan-head screws through the holes (Figure 2-18).
Use the #1 Phillips screwdriver to tighten the screws.
Figure 2-18. Tightening screws
Connecting Cables
The following sections guide you through connecting UTP and fiber cables to the
MDA.
Connecting UTP Cables
Align the RJ-45 plug with the jack on the MDA. Push gently until the plug clicks
into place (Figure
2-19).
Figure 2-19. Connecting a UTP cable to an ATM MDA
7878PEA
6108FB