Technical data

Using the Centillion 100 ATMSpeed/155 Switch Modules and Media Dependent Adapters
2-8 893-01047-A
5. Press firmly on the board at the ends of the connector to seat the MDA in
the connector on the baseboard (Figur
e 2-10).
Figure 2-10. Seating MDA in the baseboard connector
6. Insert the Phillips pan-head screws through the holes (Figure 2-11).
Use the #1 Phillips screwdriver to tighten the screws.
Figure 2-11. Tightening screws
7877PEA
7878PEA