Technical data

Using the Centillion 100 ATMSpeed/155 Switch Modules and Media Dependent Adapters
2-4 893-01047-A
3. Align the left and right edges of the printed circuit board carrier with the
slot card guides on each side of the slot (see Figur
e 2-3).
Figure 2-3. Slot module guides
4. Slide the module into the chassis until you feel it engage the backplane.
The inserter/extractor levers should still be protruding and in contact with the
front of the chassis. Do not push the module all the way into the chassis (see
Figure
2-4).
Figure 2-4. Inserting the module until it engages the backplane
6465
6466