Technical data

Using the Centillion 100 ATMSpeed/155 Switch Modules and Media Dependent Adapters
1-4
893-01047-A
Figure
1-3 shows an ATMSpeed/155 MDA module with two MDA slots for
two-port SMF, MMF, and UTP MDAs, one 10BASE-T Ethernet port (RJ-45), and
one serial port (Mini DIN 8).
Figure 1-3. Hardware features of the ATMSpeed/155 module with two
MDA slots for two-port SMF, MMF, and UTP MDAs, one
10BASE-T Ethernet port (RJ-45), and one serial port (Mini
DIN 8)
ATMSpeed/155 Switch Module
The ATMSpeed/155 Switch Module (Figure
1-1) provides two ATM ports on
each module. Onboard connectors include OC-3 ports with SC connectors for
multimode fiber (MMF) interfaces.
ATMSpeed/155S Switch Module
The ATMSpeed/155S Switch Module (Figure
1-1) provides two ATM ports on
each module. Onboard connectors include OC-3 ports with SC connectors for
single-mode fiber (SMF) interfaces.
Note: The 10BASE-T Ethernet port on the ATMSpeed/155 MCP switch
module is not supported by the switch software at this time. It will be
supported in a future release.
Inserter/extractor
levers
Captive retaining
screws
MDA slots
LEDs
Backplane connector
Power supply
connector
Printed circuit
board
MDA
MDA
10BASE-T RJ-45 port (MCP only)
Serial port (MCP only)
7881PFA