Technical data

166-024-857 Rev. A
Remote Annex Quick Start for UNIX
2
Installing Annex Software on the Windows Platform
The Annex Software CD-ROM contains a setup program that installs the
Quick2Config Annex application and the na command line interface on
the following platforms: Windows 95, Windows NT Server 3.51 and 4.0,
and Windows NT Workstation 3.51 and 4.0.
The CD-ROM can also be used to install Quick2Config Annex on PC
running Windows 3.1 or Windows for Workgroups 3.11.
If you are installing Quick2Config on a Windows 3.1 or Windows for
Workgroups 3.11 platform, you may be required to install additional
software that is provided on the CD-ROM. See Installing Remote
Annex Network Software for Windows for details.
To install Quick2Config Annex and na on a Windows platform:
1. Put the CD-ROM into the system’s CD drive.
2. Use the File Manager to select the CD-ROM disk.
3. Double-click on the setup.exe file.
4. Follow the dialog box instructions to select Install Software
and then NA Command Line Interface and Quick2Config
Annex.
5. When prompted for an installation directory, click the
key to accept the default selection.
Refer
Installing Remote Annex Network Software for Windows for additional
information about installing the Annex software on specific Windows
platforms.
Next