Technical data
Table Of Contents
- Contents
- Installing Annex Software on the Windows Platform
- Installing Annex Software on the UNIX Host
- Hardware Setup
- Network Address
- Booting the Remote Annex
- Configuring the Remote Annex
- Configuring the Remote Annex 6300
- Initial Setup with na
- Setting PRI Channels Using Annex Manager
- Setting PRI Channels Using Quick2Config Annex
- 1. At the Window system, click on the Quick2Config...
- 2. Choose File > Add Annex, enter the name or IP a...
- 3. Click on the Annex name in the tree view.
- 4. Choose Config > Edit Configuration File to modi...
- 5. Modify the telephone numbers for the Sync PPP a...
- 6. Copy and modify blocks for other telephone numb...
- 7. Select the Annex and use the Call Defaults tab ...
- 8. Choose Autodetect in the Mode box and enter the...
- 9. Choose Help > Contents or click on in the dialo...
- Configuring Security
1166-024-857 Rev. A
Remote Annex Quick Start for UNIX
This guide is designed for quick installation and configuration of a
Remote Annex with a UNIX host using either Annex Manager on the
UNIX host or Quick2Config Annex, a Windows-based Annex
management tool. The instructions apply to all Remote Annex models
including the Remote Annex 6300.
The instructions in this guide cover:
• Loading Remote Annex software on a Windows system
• Using an installation script to copy the Remote Annex
software from
CD-ROM onto a UNIX host system (load host)
• Installing the Remote Annex hardware
• Setting the network addresses
• Booting the Remote Annex
• Configuring the Remote Annex using Annex Manager or
Quick2Config Annex and the na utility
The sample commands and output that follow the instructions involve a
Remote Annex on an Ethernet network with the IP address 192.9.200.62.
The host system address is 192.9.200.55. Certain commands may vary
depending on the particular UNIX platform you are using for the host.
See the following documents for additional information:
• Remote Annex Administrator’s Guide for UNIX
• Remote Annex 6300 Supplement to the Remote Annex
Administrator’s Guide for UNIX
• The appropriate Remote Annex hardware installation guide
and installation notes