Technical data

166-024-857 Rev. A
Remote Annex Quick Start for UNIX
14
Setting PRI Channels Using Quick2Config Annex
To configure PRI channels using Quick2Config Annex:
1. At the Window system, click on the Quick2Config icon to
open the application on the Windows system.
2. Choose File > Add Annex, enter the name or IP address of
the Remote Annex in the Add Annex dialog box, and click
on .
Quick2Config Annex lists the Annex in the tree view on the left.
3. Click on the Annex name in the tree view.
Quick2Config displays a set of tab windows on the right.
4. Choose Config > Edit Configuration File to modify Session
Parameter Blocks.
Quick2Config opens an editor with the default configuration
file. The Session Parameter Blocks are listed in the %pri
section.
%pri
begin_session sync
called_no 123-555-1212
bearer data
call_action sync
set mode ppp
end_session
begin_session v120
called_no 123-555-1313
bearer data
call_action v120
set mode auto_detect
end_session
begin_session default
call_action modem
set mode auto_detect
end_session
OK