Technical data

Table Of Contents

Remote Annex Quick Start for UNIX

166-024-857 Rev. A

Using Annex Manager

The following instructions assume that you have installed Annex

Manager R2.3 and are maintaining a previous version for use with

Remote Annexes not running Release 13.3.

To conﬁgure Remote Annex Ports using Annex Manager:

1. Reset the GUI_AM_DIR variable and start Annex

Manager:

setenv GUI_AM_DIR /usr/annex/gui_am_R2.3

$GUI_AM_DIR/bin/gui_am

2. Enter the name of the Annex or its IP address and click on

3. Fill out the items in the window and click on

4. Repeat Step 3. for screen in the Setup Option Menu in the

upper right corner of the window.

Using Quick2Conﬁg Annex

To conﬁgure Remote Annex Ports using Quick2Conﬁg Annex:

1. At the Windows system, click on the Quick2Conﬁg icon to

open the application.

2. Choose File > Add Annex, enter the name or IP address of

the Remote Annex in the dialog box, and click on .

Quick2Conﬁg Annex lists the Annex in the tree view on the left

and displays a set of tab windows on the right.

3. Select the Annex and use the tab windows to review and

modify Annex parameters.

4. Select each Annex port and use the tab windows to

conﬁgure the port as a terminal or modem port.

Setup...

Apply