Installation guide

3-19Remote Annex 2000 Hardware Installation Guide
Chapter 3 ROM Monitor Commands
ipx
The ipx command sets several parameters associated with IPX
booting and dumping. This is useful when loading the Remote Annex
2000’s operational image from a Novell file server. The syntax is:
ipx [–d]
The ipx command display looks like this:
Theipx –d command displays the current settings for all of the entries.
The command display looks like this:
monitor:: ipx
Enter IPX file server name [<uninitialized>]:: saturn
Enter Frame type, 0=802.3 1=Ethernet II 2=802.2 3=SNAP\
[802.3]::
Enter IPX dump user name [<uninitialized>]:: hobbes
Enter IPX dump password [<uninitialized>]:: ******
Verify IPX dump password []:: ******
Enter IPX dump path [<uninitialized>]:: SYS:\user\hobbes\
monitor:: ipx –d
IPX preferred load file server: “saturn”
IPX frame type: "802.3"
IPX dump user name: “HOBBES”
IPX dump password: <SET>
IPX dump path name: “SYS:\user\hobbes\”