Installation guide

Remote Annex 2000 Hardware Installation Guide

Chapter 2 Installing the Remote Annex 2000

2-14

4 Display or print the README.TXT ﬁle for updated information about

the current version of Annex Manager for DOS software.

5 Type INSTALL and press .

A list of your PC’s available drives appears.

6 Select a network drive that is accessible to all users on the network

and press .

7 Enter the name of the directory where you want to copy the ﬁles or

select the default \PUBLIC directory and press .

The installation program copies each ﬁle from the

Administrator’s Install Disks to the network drive and directory

you speciﬁed in Steps 5 and 6. The installation program then

decompresses and veriﬁes each ﬁle being copied. See the Annex

Manager for DOS Administrator’s Guide for the PC for a list and

description of the Administrator’s ﬁles.

8 Power up or reset the Remote Annex 2000. Do not enter test mode.

9 Run the Annex Installation Utility. At the prompt, start the Annex

Installation Utility by typing:

AMINSTAL

A window appears with selections for installing or upgrading

the software.

10 Select Install and press .

The Annex Installation utility automatically lists any uninstalled

Annexes in the Uninstalled Annexes window.

11 Use the arrow keys or the mouse to highlight the Annex(es) to be

installed and select OK.

A list of available servers appears.

To install several Remote Annexes, select each

Remote Annex and press .

Enter