Installation guide

Remote Annex 2000 Hardware Installation Guide
Chapter 2 Installing the Remote Annex 2000
2-2
Connecting the Remote Annex to a LAN requires the following
equipment:
❑ The appropriate network cable (e.g., Ethernet transceiver
cable) for connecting to a LAN or an Ethernet loopback
connector.
❑ The console port cable (supplied with software) and a
console terminal.
❑ An RJ45 cable (for a SLIP connection).
❑ A PC on the network (Novell boot).
Connecting devices to the Remote Annex 2000 requires:
❑ One RJ45 cable for each serial connection.
Connecting a LAN Using Ethernet
The Remote Annex 2000 supports three types of Ethernet connections:
Thin Ethernet, Thick Ethernet, or Twisted Pair (see
Figure 2-1).
Figure 2-1. Remote Annex 2000 Ethernet Connections
12345678
9 10111213141516
Console
(Port 1)
10Base5
Ethernet
Connector
Plate for
10Base2 or 10BaseT
Ethernet (Optional)
AC Line
Socket
Power
Switch
RJ45 Port
Connectors