Installation guide

Remote Annex 2000 Hardware Installation Guide
Appendix C Warranty and Technical Support Information
C-12
Using the ROM Monitor addr command, obtain the following Annex
addresses:
IP address:
_________________________________________________________
Preferred load host:
_________________________________________________________
Subnet mask:
_________________________________________________________
Broadcast address:
_________________________________________________________
Image name:
_________________________________________________________
LAN interface: Ethernet ThinNet Twisted
Pair
Type of IP encapsulation: Ethernet IEEE802
Problem description (indicate commands issued, error messages
received, source of errors,
etc.):_____________________________________________________
_________________________________________________________
_________________________________________________________
Network environment (e.g., Ethernet backbone, multiport, other
hosts):___________________________________________________
_________________________________________________________