Installation guide

A-1Remote Annex 2000 Hardware Installation Guide
Appendix A Port Pin/Signal Allocations
This appendix identifies the signals and the associated pins used
by the following Remote Annex 2000 ports:
❑ Serial Port (Port 1 is Console Port).
❑ 10Base2 Ethernet Port.
❑ 10Base5 Ethernet Port.
❑ 10BaseT Ethernet Port.
Serial Port
Figure A-1 illustrates a serial port receptacle. Table A-1 lists the
receptacle’s pin/signal allocations.
Figure A-1. Serial Port Receptacle
1 8