Installation guide

Remote Annex 2000 Hardware Installation Guide
Chapter 4 Troubleshooting Procedures
4-22
Each dump file contains a complete image of the Remote Annex 2000
RAM memory and hardware state. The amount of space required for
the dump file varies according to the port configuration. The ROM
Monitor config command displays the amount of memory for the
Remote Annex 2000.
Table 4-9 shows sample dump file names. All pathnames are relative
to the file /usr/spool/erpcd/bfs.
Table 4-9. Dump File Naming Conventions
Remote Annex
2000 Address
Network
Address BSD Filename System V Pathname
63.0.0.75 63 dump.63.0.0.75 dump/63/0.0.75
131.140.23.1 131.140 dump.131.140.23.1 dump/131.140/23.1
195.46.2.15 195.46.2 dump.195.46.2.15 dump/195.46.2/15