Technical data
Table Of Contents
- Contents
- Before Installing the Software
- Software Installation
- Hardware Setup
- Network Address
- Booting the Remote Annex
- Configuring the Remote Annex
- Remote Annex 2000 Remote Annex 4000 Remote Annex 5...
- Using Quick2Config Annex
- 1. Invoke na, configure the Remote Annex to accept...
- 2. Click on the Quick2Config icon to open the appl...
- 3. Choose File > Add Annex, enter the name or IP a...
- 4. Select the Annex and use the tab windows to rev...
- 5. Select each Annex port and use the tab windows ...
- 6. Choose Help > Contents or click on in the dialo...
- Using the na Utility
- Using Quick2Config Annex
- Inbound Modem
- Outbound Modem
- Inbound/Outbound
- Centronics Interface
- Dataproducts Interface
- Remote Annex 2000 Remote Annex 4000 Remote Annex 5...
- Configuring the Remote Annex 6300
- Initial Setup with na
- Setting Up PRI Channels
- 1. Click on the Quick2Config icon to open the appl...
- 2. Choose File > Add Annex, enter the name or IP a...
- 3. Click on the Annex in the tree view.
- 4. Choose Config > Edit Configuration File to modi...
- 5. Modify the telephone numbers for the Sync PPP a...
- 6. Copy and modify blocks for other telephone numb...
- 7. Select the Annex and use the Call Defaults tab ...
- 8. Choose Autodetect in the Mode box and enter the...
- 9. Choose Help > Contents or click on in the dialo...
- Configuring Security
166-024-858 Rev. A
Remote Annex Quick Start for Windows
2
Before Installing the Software
Prerequisites
To install Remote Annex Server Tools for Windows NT, you need:
• Microsoft Windows NT Server 3.51 or 4.0 configured to
support the TCP/IP protocol
• Administrative privileges on the server
• 10MB free disk space on an NTFS drive
• One
Windows NT Client 3.51 or 4.0 license per Remote
Annex
• PC with an Intel 486 (or higher) CPU with 32 MB RAM
• CD-ROM drive to install the product
• Several formatted floppy disks for PCs without CD-ROMs
Before you install the tools, you should close all other Windows
programs.
The CD-ROM includes the appropriate Remote Annex software release
required by the Remote Annex Server Tools
for Windows NT.
Windows NT Log On Privileges
If you install Remote Annex Server Tools for Windows NT on a primary
domain controller, all users must have the right to log on locally. The
system cannot authenticate users who do not have this right.