Technical data
Table Of Contents
- Contents
- Before Installing the Software
- Software Installation
- Hardware Setup
- Network Address
- Booting the Remote Annex
- Configuring the Remote Annex
- Remote Annex 2000 Remote Annex 4000 Remote Annex 5...
- Using Quick2Config Annex
- 1. Invoke na, configure the Remote Annex to accept...
- 2. Click on the Quick2Config icon to open the appl...
- 3. Choose File > Add Annex, enter the name or IP a...
- 4. Select the Annex and use the tab windows to rev...
- 5. Select each Annex port and use the tab windows ...
- 6. Choose Help > Contents or click on in the dialo...
- Using the na Utility
- Using Quick2Config Annex
- Inbound Modem
- Outbound Modem
- Inbound/Outbound
- Centronics Interface
- Dataproducts Interface
- Remote Annex 2000 Remote Annex 4000 Remote Annex 5...
- Configuring the Remote Annex 6300
- Initial Setup with na
- Setting Up PRI Channels
- 1. Click on the Quick2Config icon to open the appl...
- 2. Choose File > Add Annex, enter the name or IP a...
- 3. Click on the Annex in the tree view.
- 4. Choose Config > Edit Configuration File to modi...
- 5. Modify the telephone numbers for the Sync PPP a...
- 6. Copy and modify blocks for other telephone numb...
- 7. Select the Annex and use the Call Defaults tab ...
- 8. Choose Autodetect in the Mode box and enter the...
- 9. Choose Help > Contents or click on in the dialo...
- Configuring Security
1166-024-858 Rev. A
Remote Annex Quick Start
for Windows
This guide is designed for quick installation of a Remote Annex in a
Windows NT network environment and configuration of the Annex using
Quick2Config Annex. The instructions apply to all Remote Annex
models including the Remote Annex 6300.
The procedures in this guide cover:
• Installing the software on the Windows NT server
• Setting up the Remote Annex
• Defining various network addresses
• Booting the Remote Annex
• Configuring the Remote Annex with Quick2Config and the
na utilities
Refer to
Installing Remote Annex Network Software for Windows and the
appropriate Remote Annex hardware manuals, release notes and
installation guides for additional information. For detailed information
about configuring the Annex and its ports, refer to the Remote Annex
Server Tools for Windows NT
®
User Guide.